Hello, this is Sun Production.
We would like to explain the purpose of our Version History section.
We spend months, sometimes years, developing a single product. We refine every detail and only release a product when we are convinced there is nothing left to fix.
However, as time passes, we often find small areas where there is still room for improvement.
Whenever that happens, we make immediate improvements to continuously elevate the perfection of our products.
Even the Sun Smoke line, originally launched in 2017, is still undergoing continuous detail refinements to this day.
If you are worried that "the performance might change significantly after I buy it," please rest assured.
We do not make drastic changes to performance in this manner. If major functions were to change, it would be released as a completely new version.
These detail improvements are mostly subtle refinements that may be hard to notice, or minor changes with no functional difference.
However, we believe that gathering these small changes allows us to provide a better final product.
We thought that sharing these changes transparently might be helpful for your product selection,
so we decided to share our improvement history through this Version History board.
We hope this information helps you, and we will continue to strive for better products.
[Important Note]
We list the modification dates in the Version History, but please note that earlier versions may be shipped depending on stock availability.
Also, please understand that the versions of products in stock at third-party magic shops (dealers) may differ from the latest updates.
Thank you.
Sincerely, Sun Production
v1.1.0
| Improvements | Reason & Effect |
|---|---|
| Changed Wand 3D printing method | Improved durability and quality |
| Modified on 2025. 11. 01 | |
View history for v1.0.0 and below โพ
v1.0.0
All products released since March 1, 2024, are designated as v1.0.0.
v2.2.0
| Improvements | Reason & Effect |
|---|---|
| Change to embedded nut structure | Improved product perfection |
| Modified on 2025. 12. 07 | |
View history for v2.1.0 and below โพ
v2.1.0
| Improvements | Reason & Effect |
|---|---|
| Change of paint base & finish coating | Quality improvement |
| Removal of left screw hole due to structural change | Improved product perfection |
| Modified on 2025. 10. 10 | |
------------------
v2.0.0
Applied to products shipped after Aug 1, 2025
------------------
v1.0.0
Products shipped before July 31, 2025 are officially designated as v1.0.0.
v2.1.0
| Improvements | Reason & Effect |
|---|---|
| Arm kit structure change | Improved comfort when wearing |
| Arm kit height lowered by 0.4mm | Reduced strain when wearing |
| Arm kit band material change | Quality improvement |
-2025. 12. 01-
View history for v2.0.0 and below โพ
v2.0.0
Applied to products shipped after August 1, 2025
v1.0.0
Products shipped before July 31, 2025 are officially designated as v1.0.0.
However, slight variations may exist depending on the production date.
v3.1.0
Improvement: Relocated the connector between the Pot and Main Body from the outer wall to the inside.
Reason & Effect: The previous outer wall installation restricted the wire by about 2cm,
causing inconvenience in setting. Moving it inside improves freedom of setup.
- 2025. 09. 16 -
View history for v3.0.0 and below โพ
v3.0.0
Improvement: Changed charging port from Mini 5-pin to DC jack and included an adapter.
Reason & Effect: Significantly improved charging speed.
Improvement: Changed tip fastening method from 4-point to 3-point.
Reason & Effect: Simplified structure for faster setup.
Improvement: Changed Pot screw fastening structure and improved durability.
Reason & Effect: Smoother fastening (resolved stiffness) and improved durability as a bonus.
Improvement: Changed Pot and Main Body from integrated type to connector type.
Reason & Effect: Enables self-repair, resolving maintenance difficulties.
- 2025. 08. 25 -
----------------------------------------------------
v2.0.0
Applied to products shipped after August 1, 2025
----------------------------------------------------
v1.0.0
Products shipped before July 31, 2025 are officially designated as v1.0.0.
However, slight variations may exist depending on the production date.
v2.2.0
| Improvements | Reason & Effect |
|---|---|
| Color gimmick thickness increased by 0.4mm | Matched height with main body to improve finish |
| Modified on 2025. 12. 01 | |
View history for v2.1.0 and below โพ
v2.1.0
| Improvements | Reason & Effect |
|---|---|
| Detail modification and armband structure change | Improved comfort when wearing |
| Modified on 2025. 08. 20 | |
------------------
v2.0.0
Products manufactured after August 1, 2025
------------------
v.1.0.0
The Dimension L 1.0 version was manufactured by a third party, not by us.
Currently, third-party production has ceased, and Dimension L is produced exclusively in-house.
v2.0.1
Applied to products shipped after August 1, 2025
View history for v2.0.0 and below โพ
v2.0.0
Products shipped before July 31, 2025, and units capable of self-replacement are officially designated as v2.0.0.
However, slight variations may exist depending on the production date.
----------------------------------------------------
v1.0.0
Products where the red needle cannot be self-replaced are officially designated as v1.0.0.
Self-replacement capability can be identified by screw holes on both sides of the locking mechanism.
If holes are present, it is v2.0.0 or higher. If absent, it is v1.0.0.